====== Add New Disk in Linux ======
===== Check Disk is installed =====
<code bash>
fdisk -l|grep Disk
</code>

===== Partition Disk =====
Assuming new disk is ''sdc''
<code bash>
fdisk /dev/sdc
</code>
Commands
<code>
p - to print the partition table
n - to create new
w - to write
</code>

===== Make file system =====
Assume you created a single partition on sdc1
<code bash>
mkfs -t ext4 /dev/sdc1
</code>

===== Reserve 1% for root =====
<code bash>
tune2fs -m 1 /dev/sdc1
</code>

===== Create file system =====
Create Mount directory
<code bash>
mkdir /home1
</code>

===== Get Disk UUID =====
<code bash>
blkid|grep /dev/sdc1
</code>


===== Make entry in fstab to automount =====
<code>
Add line to /etc/fstab:
# New 2 TB Hard Disk
UUID=d1bff2fd-537b-40fb-8981-cb59bd8e1221 /home1          ext4    defaults        0       2
</code>

Mount with
<code bash>
mount -a
</code>

Check with
<code bash>
df -Ph
</code>

Test with
<code bash>
dd if=/dev/urandom of=/home1/sample.txt bs=1G count=1
</code>